Center Section

Version 2.0 | Last update: 10. 03. 2020

Printing

For successful assembly of center section you need print out these parts:

Cn1

Can be printed without supports and brim.  

Copies to be printed for one section: 2
Print time: 8h 40m*

Part version: V2.5
STL File name: A1_Cn1_2x_v2_5.stl

Cn2

Use brim. Can be printed without supports.

Copies to be printed for one section: 1
Print time: 6h 15m*

Part version: V2.3
STL File name: A1_Cn2_1x_v2_3.stl

Cn3

Use brim. Can be printed without supports.

Copies to be printed for one section: 1
Print time: 6h 27m*

Part version: V2.4
STL File name: A1_Cn3_1x_v2_4.stl

Cn4

Consider use of brim.

Copies to be printed for one section: 1
Print time: 3h 30m*

Part version: V2.3
STL File name: A1_Cn4_2x_v2_3.stl

Cn5

Consider use of brim.

Copies to be printed for one section: 1
Print time: 4h*

Part version: V1.2
STL File name: A1_Cn5_1x_v1_2.stl

Cn6

Consider use of brim.

Copies to be printed for one section: 2
Print time: 5h*

Part version: V2.3
STL File name: A1_Cn6_2x_v2_3.stl

Cn7

Use brim and supports on build plate only. Enforce support for the first 18-20 layers.

Copies to be printed for one section: 4
Print time: 2h 30m*

Part version: V2.2
STL File name: A1_Cn7_4x_v2_2.stl

Cn8

Consider use of brim.

Copies to be printed for one section: 2
Print time: 3h 45m* 

Part version: V2.3
STL File name: A1_Cn8_2x_v2_3.stl

Cn9

Consider use of brim.

Copies to be printed for one section: 1
Print time: 5h 20m*

Part version: V2.3
STL File name: A1_Cn9_1x_v2_3.stl

Cn10

Can be printed without supports and brim.

Copies to be printed for one section: Depends on configuration (Up to 5)
Print time: 1h 20m*

Part version: V1.2
STL File name: A1_Cn10_1x_v1_2.stl

* Times were measured with settings of 0.20 layer height, 40% infil, for PLA filament. Sliced with Slic3r for MK3 Prusa printer. Note, that this is not print settings recomendation. Read this

This documentation book is released under the CC-NC-SA 4.0 License.