Radio Antenna Mast

Version 2.0 | Last update: 10. 02. 2020

Printing

For successful assembly of this section you need print out these parts:

At1

Can be printed without supports and brim.  

Copies to be printed for one section: 1
Print time: 1h 16m*

Part version: V2
STL File name: A1_An1_1x_v2.stl

An2

Can be printed without supports and brim.

Copies to be printed for one section: 1
Print time: 3h 50m*

Part version: V2
STL File name: A1_An2_1x_v2.stl

Hc1

Can be printed without supports. Use brim.

Copies to be printed for one section: 1
Print time: 50m*

Part version: V1
STL File name: A1_Hc1_1x_v1.stl

Hc2

Can be printed without supports. Use brim.

Copies to be printed for one section: 1
Print time: 50m*

Part version: V1
STL File name: A1_Hc2_1x_v1.stl

* Times were measured with settings of 0.20 layer height, 40% infil, for PLA filament. Sliced with Slic3r for MK3 Prusa printer. Note, that this is not print settings recomendation. Read this

Assembly

This documentation book is released under the CC-NC-SA 4.0 License.