Depth Sensor Mount

Version 2.0 | Last update: 13. 01. 2020

Printing

For successful assembly of this section you need print out these parts:

Ds1

Amethyst AUV Docs - Depth Sensor Mount V2 - Ds1

Can be printed without supports and brim.  

Copies to be printed for one section: 1
Print time: 22m*

Part version: V1
STL File name: A1_Ds1_1x_v1.stl

Ds2

Amethyst AUV Docs - Depth Sensor Mount V2 - Ds2

Can be printed without supports and brim.

Copies to be printed for one section: 1
Print time: 1h 24m*

Part version: V1.2
STL File name: A1_Ds2_1x_v1_2.stl

* Times were measured with settings of 0.20 layer height, 40% infil, for PLA filament. Sliced with Slic3r for MK3 Prusa printer. Note, that this is not print settings recomendation. Read this

 

This documentation book is released under the CC-NC-SA 4.0 License.