GPS Antenna Mast

Version 2.0 | Last update: 24. 03. 2020

Printing

For successful assembly of this section you need print out these parts:

GPS1

Can be printed without supports and brim.  

Copies to be printed for one section: 1
Print time: 1h 25m*

Part version: V2
STL File name: A1_GPS1_1x_v2.stl

GPS2

Can be printed without supports and brim.

Copies to be printed for one section: 1
Print time: 2h 45m*

Part version: V2
STL File name: A1_GPS2_1x_v2.stl

GPS3

Can be printed without supports. Consider brim.

Copies to be printed for one section: 1
Print time: 36m*

Part version: V2
STL File name: A1_GPS3_1x_v2.stl

GPS4

Can be printed without supports. Use brim.

Copies to be printed for one section: 1
Print time: 1h 26m*

Part version: V2
STL File name: A1_GPS4_1x_v2.stl

* Times were measured with settings of 0.20 layer height, 40% infil, for PLA filament. Sliced with Slic3r for MK3 Prusa printer. Note, that this is not print settings recomendation. Read this

Assembly

This documentation book is released under the CC-NC-SA 4.0 License.